Welcome, Guest. Please login or register.
January 17, 2021, 07:48:01 am

Login with username, password and session length
435311 Posts in 37295 Topics by 9537 Members
Latest Member: Mgabski
Search: Advanced search
Advertiser Inquiries
+ My Community
|-+ Library Tech Library Tech
| |-+ Power and Drivetrain Combos
| | |-+ 289/302 - non-stroker combos
| | | |-+ Best Combo for AOD mustang car is stock
0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: Best Combo for AOD mustang car is stock  (Read 6502 times)
Trick65Comet
4 Banger
*
Offline Offline

Posts: 16

Location: Maple Ridge BC Canada

« on: April 28, 2009, 11:56:54 pm »

What is the best known combo for the AOD Mustang it's all stock?
What gears?
Still what it to be streetable.
Logged
chrisb76
Small Block
***
Offline Offline

Posts: 102


Location: Tylertown,MS
You only got one life to live.


« Reply #1 on: August 31, 2009, 10:56:19 pm »

i've run 3.73 gears with a 125 nx shot on a stock '89 gt for a long time.it would pull mid to high 13's then i put a 2400 stall,and 4.10 gears with 150 shot wet kit,and pulled mid 12's all this was still on the stock motor,and with nitrous you maintain streetability.
Logged

'89 coupe (rescued ssp car)
'90 lx hatch(4banger turd)
'79 cobra(all original with 302)
'79 hatch 302/5speed
Blue Hatch
Small Block
***
Offline Offline

Posts: 204


Location: Mooresville, NC
Cashin' Checks and Crackin' Necks


« Reply #2 on: September 05, 2009, 08:40:56 pm »

I had 4.10's in my 86, and loved it. My car had long tubes, pro-chamber, flowmaster mufflers, pullys, the timing bumped up,and everything else was bone stock. Oh, i had a TCI Streetfighter convertor in it. The best 1/8 mile i ran was 8.89 @ 77mph. 60ft was somewhere in the 1.9-2.0 range. I thought the convertor was still too tight. Now mind you, this was an 86. They were the turd's, 200hp. A 225 car should be a little quicker. I think for and AOD, 4.10's or lower would be best.
Logged

Stock shortblock 302, World Products J/R Heads, TFS Stage 1 cam, TMoss ported Holley Systemaxx, 75mm Accufab TB, PMAS 95mm Velocity Meter, 24lb Injectors, C4 w/ PTC 3400 stall, 4.10 gear...7.694 @ 88.49 mph and 12.157 @ 109.32mph. New Times Coming Soon!!
Outlaw Bill
Adv_SBFTechie
Big Block
****
Offline Offline

Posts: 4760


Location: Canton, Michigan

« Reply #3 on: September 05, 2009, 08:52:36 pm »

This is what I use for a good low 13 sec to high 12 sec aod car

- 4.10 gears
- 3500-4000 stall
- 26x8.5 slicks or drag radial
- Lentech valve body
- under drives
- 160 deg thermostat(180deg  is good also)
- 65-70 mm throttle body is best for the stock intake
- 75-80mm mass air
- adjustable fuel pressure regulator
- Hooker 15/8 full length headers
- 2.5 -3.0 exhaust
- 14-16 deg base timing......must use 93-94 octane fuel
- electric fan
- 70/30 front struts
- TeamZ street series rear control arms
- remove front sway bar
Logged

www.TeamZmotorsports.net

TeamZmotorsports 25.2 outlaw drag radial stock suspension 1991 Mustang
Thank You to the following for their help
TeamZmotorsports
Marcella Manifolds
Schoneck Composite
Ultimate Converter Concepts


"Stupid is as stupid does", "You can't fix stupid"
"Common sense is not common"
Pages: [1] Go Up Print 
« previous next »
Jump to:  



Powered by MySQL Powered by PHP Valid XHTML 1.0! Valid CSS!
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines



408 Stroker