My Community

General Tech => Automatic Transmissions => Topic started by: jimzilla on October 20, 2016, 02:59:48 pm



Title: B&M Hammer Shifter/A.O.D.
Post by: jimzilla on October 20, 2016, 02:59:48 pm
I have a B&M Hammer Shifter P#81002 the one that fits in the stock center counsel that I am installing on my A.O.D. I cannot get the center counsel to clear the shaft that the shifter handle connects to. I already removed the shifter handle. I don't think I can remove anymore parts off the shifter and I know the glove box is closed in the pic but the results are the same.
Any one ran into this problem? any tips?


Title: Re: B&M Hammer Shifter/A.O.D.
Post by: 85_GT on October 20, 2016, 03:34:54 pm
Can't mount the shifter through the hole after the console is in?


Title: Re: B&M Hammer Shifter/A.O.D.
Post by: jimzilla on October 21, 2016, 09:10:45 am
It might have to come to that. I'm going to try taking the mounting bolts out and see if it will move back an inch or so.