My Community

Grass Roots Tech => Grass Roots Small Block Windsor => Topic started by: cobra1320 on April 09, 2010, 11:37:26 am



Title: Oiling question for 302 roller cam conversion
Post by: cobra1320 on April 09, 2010, 11:37:26 am
Im building a 68 model 302 and plan on converting from a flat tappet cam to hydraulic roller cam and lifters, my question is do i need to change anything in the oil galley to supply the roller lifters or does everything stay the same ?   Any help would be appreciated.  Thanks


Title: Re: Oiling question for 302 roller cam conversion
Post by: gtvert90 on April 09, 2010, 11:46:51 am
You should always verify that the oil band on the lifters don't come out of the oil galley. That is on any build.

You are using link bar lifters and a standard base circle cam I hope  :welcomesbf


Title: Re: Oiling question for 302 roller cam conversion
Post by: cobra1320 on April 09, 2010, 12:35:02 pm
Yes im using a standard base cam and link-bar lifters. Thanks for the input.


Title: Re: Oiling question for 302 roller cam conversion
Post by: gtvert90 on April 09, 2010, 01:04:40 pm
Sounds good.  Please add your location to your profile.  And post some pics  :naughty: